Simulator Engineer, Montreal
Date: Jun 23, 2015
In your role, you will:
- Coordinate and manage the training equipment suppliers and vendors during the specification, source selection, acceptance, delivery, and ongoing support of quality management of these devices in an operational environment
- Coordinate and manage complex training device modification programs to include datas, parts, and supplier management; technical design and fabrication analysis; actual design and implementation; testing, regulatory coordination; and overall entry into service planning and management
- Coordinate and manage all government regulatory efforts associated with the training equipment including the FAA, TC and EASA as well as other country’s agencies
- Coordinate the data collection efforts associated with key performance indicators including analysis of the data and providing positive and constructive feedback to supervision
Simulator Maintenance Technician, Denton, TX
US Aviation Academy - Denton, TX
Job Description Simulator Maintenance Technician:
Perform all maintenance actions including troubleshooting for flight Mechtronix, Precision Flight Controls, Redbird FMX, and Elite FTD, frasca, maintenance simulators. This includes diagnosing and correcting complex problems on simulators. Performing preventive maintenance (PM) tasks on simulators and associated training and support systems. Utilize a maintenance management system to record and track all maintenance activities. Perform pre and post flight activities on all simulators. May perform visual alignments. May perform simulator testing and evaluate results of that testing. May assist during modifications and simulator enhancements. Will identify and coordinate efforts to correct training system deficiencies. Perform other logistics duties including managing parts, repair of parts and testing. May perform housekeeping functions within the simulators as required. May perform administrative tasks as required. May direct other technicians.
F-16 Aircrew Training Device (ATD)/ Simulator Technician
Job Details
Level Experienced
Salary Range Undisclosed
Job Location USA-UT-Hill AFB
Travel Percentage As Required
Position Type Full Time
Job Shift Undisclosed
Education Level Not Specified
Job Category Training
Description
Position Description:
Applies advanced aircrew training device knowledge and experiÂence during the installation and maintenance of the F-16 ATD. Must be capable of solving unusually complex system problems--those that typically are not able to be solved solely by reference to maintenance manuals or similar docuÂments. Must be willing to travel in support of ATD installations at various locations, including potential overseas locations.
Simulator Maintenance Technician (Levels I, II, III) - C-17-234951
Description
Simulator Maintenance Technician – All Levels
Textron Inc. is a multi-industry company that leverages its global network of aircraft, defense, industrial and finance businesses to provide customers with innovative solutions and services. Textron is known around the world for its powerful brands such as Bell Helicopter, Cessna, Beechcraft, Hawker, Jacobsen, Kautex, Lycoming, E-Z-GO, Greenlee, and Textron Systems. For more information visit: www.textron.com.
Simulator Technician - Part Time (Wichita East)
Ref 14230
Country United States
State / Province Kansas
Category Simulator Technicians
Job Description
Responsible for maintaining and/or repairing flight training devices (FTD Simulators) per FAA/JAA requirements and FlightSafety standards under supervision
Responsible for operational readiness of Simulators' usage by instructors and FSI customers.
Simulator Maintenance Technician I, Texas
Ref 14343
Country United States
State / Province Texas
Category FSSC - C-5
Job Description
The Simulator Maintenance Technician I is an apprentice and is responsible for accomplishing the day-to-day maintenance of aircrew training devices. This position requires working any shift (day, swing or mids) as required for successful operations of the maintenance function for the C-5 Aircrew Training Systems (ATS). The Simulator Maintenance Technician I will be able to perform scheduled and unscheduled maintenance on C-5 ATS simulators, computers, and other associated ATS equipment, to the component level if necessary.
Hardware Eng. /Ops Maint. Manager - Req. # : 12372
Show Instructions
Job Title / Level Hardware Eng. /Ops Maint. Manager
Clearance Required? Secret
Location: Langley AFB, VA, US 23665
% Travel 10 - 20%
Education Bachelor's Degree or Equivalent
Job Description
AMERICAN SYSTEMS has a contingent opening for a Hardware Engineering, Operations Maintenance Manager to support ground-based and in-flight simulation activities for a contract RDT&E Simulation contract at Langley AFB. The qualified candidate will be expected to provide overall engineering oversight to support concept definition, analysis, design, implementation, verification, validation, operation, and documentation of pilot-in-the-loop simulators and subsystems including motion, visual, aural, graphic display, and force-feel cue systems. The qualified candidate will be expected to work directly with the customer management team and the Program Manager to identify project requirements, assign resources, and meet milestones in support of the success of the program.
Simulator Technician, Gatwick
Requisition Number
1500018306en
Requisition Number: 1500018306en
Primary Location: Gatwick, West Sussex, United Kingdom
Job: Customers Training
Job Level: Entry Level
Shift: Rotating
Job Description
The Boeing global network operates training campuses on six continents, supporting more than 80 full-flight simulators, including advanced technology 787 training suites. Boeing training instructors, highly qualified and knowledgeable, deliver training at Boeing, customer or third party locations around the world.
We have a Simulator Technician become available at the Boeing Flight Services campus located near Gatwick Airport. This 4,900 square meter facility houses full-flight simulators, and the exclusive 787 training suite.
C-130J MATS Simulator Technician I, AR-Little Rock
Job Details
Level Experienced
Salary Range Undisclosed
Job Location USA-AR-Little Rock
Travel Percentage Negligible
Position Type Full Time
Job Shift Any
Education Level Not Specified
Job Category
Description
Description
Applies basic knowledge and experience to solve routine technical tasks or system problems; those that typically may be performed solely by reference to maintenance manuals or similar documents. Work may be reviewed by higher level Technicians II or III to ensure compliance with accepted practices and/or standard operating procedure. Work being performed for the first time and any task for which the employee is not documented as being proficient at will be reviewed by higher level Technicians or the Maintenance Manager. Receives training in device system and subsystems
Flight Simulation Technician, Daytona Beach Campus
Organization Name DB-Advanced Flight Simulation Center
Division
Daytona Beach Campus
Brief Description
The Flight Simulation Technician provides technical expertise and team skills necessary to maintain the high quality performance of Flight Simulation and Training Devices (FSTDs) fleet at the Daytona Beach campus. Performs support and problem resolution to ensure that ERAU FSTDs are in compliance with regulatory requirements and pilot training needs. Will participate in the acquisition, relocation, installation, operation, and management of Flight Simulation and Training Devices (FSTDs) and will assist with the maintenance of the Simulator-Quality Management System (S-QMS), as well as the recruitment, training, and supervision of part-time personnel.
SIMULATION HARDWARE ENGINEER
Role:
• Capturing, analysing and deriving system requirements for flight simulators hardware equipment
• Perform hardware design, implementation and testing phases as technical point of contact.
• Liaise with project stakeholders on a technical level to ensure requirement traceability and testability
• Production of design documentation and test procedures for all designed hardware systems
Simulator Technician I, DFW
Ref 14304
Country United States
State / Province Texas
Category Simulator Technicians
ESSENTIAL DUTIES AND RESPONSIBILITIES
Responsible for maintaining and/or repairing flight training devices (FTD Simulators) per FAA/JAA requirements and FlightSafety standards under the general supervision of Lead Technician or Supervisor/Manager, FTD. Responsible for operational readiness of Simulators' usage by instructors and FSI customers.
Perform installation, operation, inspection, periodic maintenance (align & adjust), design, modification, repair, customer configuration changes, test equipment/tools, and hardware/software of modern flight simulators, associated electronic devices and classroom equipment.
Field Engineer I - Requisition ID 070708
USA-Arizona-Ft. Huachuca
Description
L-3 Link Simulation & Training (L-3 Link) is a division of L-3 Corporation. Headquartered in Arlington, TX, L-3 Link provides Total Training Solutions to government and commercial customers. Our Core capabilities include development of flight simulator devices, mission training for military pilots, commercial pilot training, and schoolhouse development and operation.
Simulator Technician, Barksdale AFB
Job Summary:
The Simulator Techincian applies advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents. Examples of such problems include isolating malfunctions, incorporating engineering changes, calculating wave forms, and tracing relationships in signal flow, using complex test instruments and computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices.
Simulator Maintenance Engineer (R0002357) A400M
Simulator Maintenance Engineer - R0002357
Regular Employment - Full-time
Job Family 07 - Customer Service
Primary Location UK-South East-Carterton
Organization Thales UK
Join our team of simulation maintenance engineers in Brize Norton and you will provide maintenance for the A400M Synthetic Training Equipment (STE) and classroom equipment. You will have the opportunity to develop your IT skills where support will be provided and you will support the service and repair the STE and Classroom equipment.
Job Offer: 40236 - Manager Technical Services
Requisition Number 40236 - Manager Technical Services Schedule Full Time
Employment Type REGULAR Country CAE NORTH EAST TRAIN-NETC SAB3
Job Category Managers Job Family 6-23 - Operations
Job Location WHIPPANY, NJ Role -
Occupation 2029 - MANAGER FACILITIES
Job Offer: 40238 - Simulator Technician I
Requisition Number 40238 - Simulator Technician I Schedule Full Time
Employment Type REGULAR Country CAE NORTH EAST TRAIN-NETC SAB3
Job Category Technical Specialist Job Family 6-23 - Operations
Job Location WHIPPANY, NJ Role -
Occupation 5048 - Simulator Technician II
Technician I
Ref 14207
Country United States
State / Province Florida
Category Simulator Technicians
ESSENTIAL DUTIES AND RESPONSIBILITIES
Responsible for maintaining and/or repairing flight training devices (FTD Simulators) per FAA/JAA requirements and FlightSafety standards under the general supervision of Lead Technician or Supervisor/Manager, FTD. Responsible for operational readiness of Simulators' usage by instructors and FSI customers.
Perform installation, operation, inspection, periodic maintenance (align & adjust), design, modification, repair, customer configuration changes, test equipment/tools, and hardware/software of modern flight simulators, associated electronic devices and classroom equipment.
Simulator Technician LaGuardia
Ref 14310
Country United States
State / Province New York
Category Simulator Technicians
ESSENTIAL DUTIES AND RESPONSIBILITIES
Responsible for maintaining and/or repairing flight training devices (FTD Simulators) per FAA/JAA requirements and FlightSafety standards under the general supervision of Lead Technician or Supervisor/Manager, FTD. Responsible for operational readiness of Simulators' usage by instructors and FSI customers.
Perform installation, operation, inspection, periodic maintenance (align & adjust), design, modification, repair, customer configuration changes, test equipment/tools, and hardware/software of modern flight simulators, associated electronic devices and classroom equipment.
|